Vòng bi cônGiá thị trường: mời liên hệ
Thông tin sản phẩm
- Vòng bi côn
Thêm vào giỏ
- Thương hiệu: NSK
- Vì sao nên mua hàng tại STD&P
Mua sản phẩm NSK từ STD&P để đảm bảo sản phẩm NSK chính hãng. Tránh nguy cơ mua phải sản phẩm NSK giả (fake) kém chất lượng.
- Sản phẩm NSK chính hãng
- Đầy đủ giấy tờ CO,CQ gốc
- Bảo hành chính hãng
- Giá bán cạnh tranh nhất
- Dịch vụ sau bán bán hàng chuyên nghiệp
- Giao hàng toàn Quốc
- Hỗ trợ kỹ thuật 24/7
Thông tin cơ bản về Vòng bi côn
Bearings of this type use conical rollers guided by a back-face rib on the cone. These bearings are capable of taking high radial loads and axial loads in one direction.
In the HR series, the rollers are increased in both size and number giving it an even higher load capacity. They are generally mounted in pairs in a manner similar to single-row angular contact ball bearings. In this case, the proper internal clearance can be obtained by adjusting the axial distance between the cones or cups of the two opposed bearings. Since they are separable, the cone assemblies and cups can be mounted independently.
Depending upon the contact angle, tapered roller bearings are divided into three types; normal angle, medium angle, and steep angle.
Double-row and four-row tapered roller bearings are also available. Pressed steel cages are generally used.
Metric Design Tapered Roller Bearings
For metric-design medium-angle and steep-angle tapered roller bearings, the respective contact angle symbol C or D is added after the bore number. For normal-angle tapered roller bearings, no contact angle symbol is used. Medium-angle tapered roller bearings are primarily used for the pinion shafts of differential gears of automobiles. Among those with high load capacity (HR series), some bearings have the basic number suffixed by J to conform to the specifications of ISO for the cup back face raceway diameter, cup width, and contact angle. Therefore, the cone assembly and cup of bearings with the same basic number suffixed by J are internationally interchangeable. Among metric-design tapered roller bearings specified by ISO 355, there are those having new dimensions that are different than the dimension series 3XX used in the past. Part of them are listed in the bearing tables. They conform to the specifications of ISO for the smaller end diameter of the cup and contact angle. The cone and cup assemblies are internationally interchangeable. The bearing number formulation, which is different than that for past metric design, is as follows:
Inch Design Tapered Roller Bearings
Besides metric design tapered roller bearings, there are also inch design bearings. For the cone assemblies and cups of inch design bearings, except four-row tapered roller bearings, the bearing numbers are approximately formulated as follows:
Double-row Tapered Roller Bearings
Design and Feadtured of Combinations of Tapered Roller Bearings
- PHÂN PHỐI CHÍNH THỨC VÒNG BI NSK NHẬT BẢN
- GIAO HÀNG
TOÀN QUỐC 24/7
- BẢO HÀNH
- HỖ TRỢ KỸ THUẬT
BÁO GIÁ 24/7