Banner 1
Banner 2
Banner 3
  • Vòng bi cầu đỡ chặn
  • Vòng bi cầu đỡ chặn

    Giá thị trường: mời liên hệ
    • Vòng bi cầu đỡ chặn
    Thông tin sản phẩm
    • Thương hiệu: NSK
    Thêm vào giỏ
  • Vì sao nên mua hàng tại STD&P
    • Sản phẩm NSK chính hãng
    • Đầy đủ giấy tờ CO,CQ gốc
    • Bảo hành chính hãng
    • Giá bán cạnh tranh nhất
    • Dịch vụ sau bán bán hàng chuyên nghiệp
    • Giao hàng toàn Quốc
    • Hỗ trợ kỹ thuật 24/7
     
    Mua sản phẩm NSK từ STD&P để đảm bảo sản phẩm NSK chính hãng. Tránh nguy cơ mua phải sản phẩm NSK giả (fake) kém chất lượng.

Thông tin cơ bản về Vòng bi cầu đỡ chặn

The NSK range of angular contact ball bearings has been designed to meet the increasingly demanding requirements of original equipment manufacturers. These bearings have a contact angle so that they can sustain significant axial loads in one direction together with radial loads. Furthermore, since an axial component is generated when a radial load is applied, these bearings are generally used in pairs, triplex sets, quadruplex sets, or multiplex sets. NSK offers one of the most comprehensive ranges of angular contact ball bearings available.

Features

  1. High Quality Steel — Ultra clean steel to extend bearing life by up to 80%.
  2. Advanced Grease Technology — NSK lubricants that can extend grease life and performance.
  3. High Grade Balls — Quiet and smooth operation even at high speed.
  4. Super Finished Raceways — Specially honed to minimise noise and improve lubricant distribution and life.
  5. Contact Angle — Offered in 15, 25, 30 and 40 degree angles.
  6. Cages — Available in a range of Polyamide, steel and brass cage assemblies.

 

Product List

Single-Row Angular Contact Ball Bearings (Pressed Steel Cages & Machined Brass Cages)

Since these bearings have a contact angle, they can sustain significant axial loads in one direction together with radial loads. Because of their design, when a radial load is applied, an axial force component is produced; therefore, two opposed bearings or a combination of more than two must be used.
Since the rigidity of single-row angular contact ball bearings can be increased by preloading, they are often used in the main spindles of machine tools, for which high running accuracy is required.
Usually, the cages for angular contact ball bearings with a contact angle of 30° (Symbol A) or 40° (Symbol B) are in accordance with Table 1, but depending on the application, machined synthetic resin cages or molded polyamide resin cages are also used. The basic load ratings given in the bearing tables are based on the cage classification listed in Table 1.

Table1:Standard Cages for Angular Contact Ball Bearings

Series Pressed Steel Cages Machined Brass Cages
79A5,C - 7900-7940
70A 7000-7018 7019-7040
70C - 7000-7022
72A,B 7200-7222 7224-7240
72C - 7200-7240
73A,B 7300-7320 7321-7340

Matched Angular Contact Ball Bearings

The types and features of matched angular Contact Ball bearings are shown in Table 2

Figure Arrangement Features
Back-to-back
(DB)
(Example)
7208 A DB

Radial loads and axial loads in both directions can be sustained.

Since the distance between the effective load centers a0 is big, this type is suitable if moments are applied.

Face-to-face
(DF)
(Example)
7208 B DF

Radial loads and axial loads in both directions can be sustained.

Compared with the DB Type, the distance between the effective load centers is small, so the capacity to sustain moments is inferior to the DB Type.

Tandem
(DT)
(Example)
7208 A DT

Radial loads and axial loads in one direction can be sustained. Since two bearings share the axial load, this arrangement is used when the load in one direction is heavy.

 

Double-Row Angular Contact Ball Bearings

This is basically a back-to-back mounting of two single-row angular contact ball bearings, but their inner and outer rings are each integrated into one. Axial loads in both directions can be sustained, and the capacity to sustain moments is good. This type is used as fixed-end bearings.
Their cages are pressed steel.

 

Four-Point Contact Ball Bearings

The inner ring is split radially into two pieces. Their design allows one bearing to sustain significant axial loads in either direction.
The contact angle is 35°, so the axial load capacity is high. This type is suitable for carrying pure axial loads or combined loads where the axial loads are high.
The cages are made of machined brass.

Sản phẩm nổi bật

Sản phẩm cùng loại khác

0982218330